The next-generation PMAG 40 GEN M3 is a 40-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with an expanded feature set and greater compatibility, it incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR~ MK 16/16S, and others.

The PMAG 40 GEN M3 features a long-life stainless steel spring, a four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning.

In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification.

The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.

Made in the USA.

Technical:

  • Caliber:    5.56x45mm / .223 Remington
  • Platform:     AR15, M4, M16, SA-80
  • Capacity:     40 rds
  • Compatibility:     Wide compatibility with most 'STANAG 4179' platforms such as the AR15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and others

Write a review

Note: HTML is not translated!
    Bad           Good

Magpul - PMAG 40 Round AR/M4 GEN M3 5.56

  • Brand: Magpul
  • Product Code: MAG233-BLK
  • Availability: 2-3 Days
  • £45.00

  • Ex Tax: £37.50

Related Products

Magpul MAGLINK® COUPLER – PMAG® 30/40 AR/M4

Magpul MAGLINK® COUPLER – PMAG® 30/40 AR/M4

The MagLink is a coupler for PMAG 30 and 40 round AR/M4 magazines* which allows the user to attach t..

£22.00 Ex Tax: £18.33

NATO 7.62 mm Magpul Pack of 3

NATO 7.62 mm Magpul Pack of 3

When installed on the base of a rifle or subgun magazine, the Magpul provides unsurpassed speed and ..

£15.00 Ex Tax: £12.50

Magpul AFG - Angled Fore Grip

Magpul AFG - Angled Fore Grip

Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes ..

£39.99 Ex Tax: £33.33

Magpul - M-LOK Rail (5 Slots)

Magpul - M-LOK Rail (5 Slots)

Designed for use with all M-LOK compatible Hand Guards and Forends, our M-LOK® Aluminum Rail Section..

£19.00 Ex Tax: £15.83

Magpul - M-LOK Rail (7 Slots)

Magpul - M-LOK Rail (7 Slots)

Designed for use with all M-LOK compatible Hand Guards and Forends, our M-LOK® Aluminum Rail Section..

£21.00 Ex Tax: £17.50

Magpul MAGLINK® COUPLER – PMAG® 30 AK/AKM

Magpul MAGLINK® COUPLER – PMAG® 30 AK/AKM

The AK MagLink is a coupler for PMAG AK magazines designed for Kalashnikov pattern rifles in 7.62x39..

£24.00 Ex Tax: £20.00

Magpul - PMAG Ranger Plate AR/M4 GEN 2 MOE (3 Pack)

Magpul - PMAG Ranger Plate AR/M4 GEN 2 MOE (3 Pack)

The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG 30 AR/M4 GEN M2 MOE, P..

£15.00 Ex Tax: £12.50

Magpul AFG-2 - Angled Fore Grip

Magpul AFG-2 - Angled Fore Grip

The AFG-2 (Angled Fore Grip) is a slim line design that is shorter in overall length and width compa..

£40.00 Ex Tax: £33.33

Magpul M-LOK AFG - Angled Fore Grip

Magpul M-LOK AFG - Angled Fore Grip

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the origin..

£40.00 Ex Tax: £33.33

Magpul RVG - Rail Vertical Grip

Magpul RVG - Rail Vertical Grip

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effe..

£40.00 Ex Tax: £33.33

Tags: Magpul, PMAG, Magazine

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email